Outgoing Call; Dial A Number (Pre-Dial); Dial A Number Directly (Post-Dial); Dial Using A Pre-Programmed Hot Key, Soft Key Or Multifunction Button For 3740 Phones - Avaya 3749 User Manual

Outgoing Call

Dial a Number (Pre-Dial)

1. Enter the number.
2. If needed, you can press the Soft key Clear to erase the last entered digit. By using the
navigation key
3. Press Off-hook key to get the line. The number is shown on the display while dialling.
Note:
It is possible to turn on/off the tone sender in a post-dialled number by making a
Note:
long press on the *-key.

Dial a Number directly (Post-Dial)

1. Press Off-hook key to get the line.
2. Enter the number. Each entered digit is dialled immediately. However, in this case you will
not be able to correct an input error.
Note:
The number will not be added to the call list when pre-dial is used.
Note:
Dial Using a Pre-programmed Hot key, Soft key or Multifunction button for
3740 phones
A Hot key, Soft key or Multifunction button can be programmed with a telephone number. Press
the pre-programmed Hot key, Soft key or multifunction button to dial the number. The call will
automatically be connected.

Dial using the Alarm button for 3749 telephones

A 3749 telephone can be configured to call a predefined number when an alarm has been sent.
If configured, it is also possible to call the predefined number without sending an alarm by
pressing the Alarm button. Depending on the settings, the call can be established in the
following modes:
Loudspeaking mode
●
Normal mode
●

Dial a Number from the Call list

1. Open the menu by pressing the confirmation button, or the Soft key Menu.
50
Avaya 3740 and 3749 DECT Telephone - User Guide
it is possible to step and add/delete a digit in the middle of a number.
11/2010