TurboChef Encore Touch Rapid Service Manual page 109

figure
Item Description
Reference #
1 Bracket, Control Board, Support, LHS
2 Bracket, Control Board, Support, RHS
3 Cable, Extension, Ethernet
not Shown Cable, Extension, uSB
not Shown Cable, Light Ring to uSB/Card Reader 100182
not Shown Cable, Speaker
not Shown Cable, Touch Screen to Control Board COn-7076
4 Cover, uSB Port
5 Display, Touch Screen
not Shown Harness, Wiring, Low Voltage
6 Housing, Display and Controls
7 Kit, Control Board
8 Kit, Light Ring (TurboChef)
9 Kit, Light Ring (SuBWAy®)
10 SD Card, Programmed
11 Speaker
12 Speaker Gasket
13 Speaker Holder
14 uSB/Smart Card Reader
not Shown Wire, Display Jumper, 3-Pin
*Suffix determines how the display is programmed; e.g. COn-3023-4 includes the EnC-1139-4 menu.
Item Part number fastener Description
EnC-1570 nut, Keps Hex, #6-32, EXT Tooth, CRES
EnC-1571 nut, Keps Hex, #6-32, EXT Tooth, CRES
100164 Screw, #4-40 x .25, PPH Sems Int Tooth, SS 101520 (qty 2)
103193 none
none
COn-7077 none
none
EnC-1602 none
Screw, #6-32 x 3/8 Lg, PPHD, SEMS, CRES
COn-3023*
Washer, Lock, #10 EXT TH, CRES
EnC-1403 none
EnC-1501 (Housing Only) Screw, #8-32 x 3/8", PfH, 100 Deg, SS
EnC-3030 (Housing Assembly) Screw, #8-32 x 5/8", PfH, 100 Deg, SS
COn-3019 Screw, #6-32 x 1/4", Int Tooth, PPH, SS
EnC-3005-1 nut, #6-32, Keps Hex, Ext Tooth, Cres
EnC-3005-2 nut, #6-32, Keps Hex, Ext Tooth, Cres
COn-7096 none
COn-7048 Screw, Drill PT, 6-32 x 3/8, PPH, Zinc
104322-2 none
EnC-1441 Screw, #6-32 x 38 Lg, PPHD, SEMS, CRES
COn-7075 Screw, #6-32 x 38 Lg, PPHD, SEMS, CRES
i1-9475 none
fastener Part
number
102961 (qty 2)
102961 (qty 2)
none
none
none
none
none
102911 (qty 4)
102260 (qty 4)
none
102809 (qty 3)
102811 (qty 2)
102910 (qty 2)
102961 (qty 4)
102961 (qty 4)
none
101684 (qty 4)
none
102911 (qty 2)
102911 (qty 4)
none
3
A-11