TurboChef Encore Touch Rapid Service Manual page 103

figure
Item Description
Reference #
1 Blower Motor
2 Blower Motor Speed Controller
3 Bracket, BMSC – SSR
4 Bracket, Catalytic Converter (qty 2) EnC-1148
5 Catalytic Converter
6 Gasket, Heater, Top
7 Heater, Bottom
8 Heater, Top
9 Holder, Catalytic Converter
10 Jetplate, Bottom
11 Relay, Solid State (K4/K5 - Heaters) 101286
12 RTD, Cook Cavity, 3" (x2)
13 Thermostat, High-Limit, 300°C
4
9
A
To remove the catalytic converter:
1. Ensure the oven cavity is completely cool.
2. Remove the screws marked "A" and the catalytic converter
will drop beneath the holder.
3. Maneuver the catalytic converter beneath the bottom heater.
4. Lift the bottom heater and remove the catalytic converter.
Item Part number
nGC-1025
COn-3010
EnC-1352
EnC-1147
nGC-1043
EnC-3002
nGC-3011
EnC-1425
EnC-1066 (SWy/DnK)
EnC-1276 (GM)
HHC-6517-2
102075
5
A
fastener Description
nut, 1/4 - 20, Serr Hex flange, Plated
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 4)
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 4)
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (2 per)
none
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 10)
Retaining Ring, .750" ID, SS, Series SH
Washer, Shim, .752" x 1.12" x .033"
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 10)
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 11)
none
Screw, #8 x 1/2, Serr Ph Truss Hd, Sheet Mtl 101688 (qty 2)
Screw, #8-32 x 1/4, Serr Ph Truss Hd, SS
Screw, M4 x 0.7 x 8, PPHD, Int Tooth, SS
12
fastener Part number
100906 (qty 6)
none
101312 (qty 2)
102449 (qty 2)
none
101374 (qty 2 / heater)
101672 (qty 2)
7
10
A-5