Reset To Factory Default - M.T.H. Premier E94 Crocodile Operator's Manual

PULL
ENGINE IN FORWARD
Horn
YARD
ENGINE IN FORWARD
To toggle between Road and Yard service you want to toggle both Push and Pull. See
the Bell/Whistle diagram below. After the first Bell/Whistle combination you will get a
two toot response from the engine. Perform the second Bell/Whistle combination and
you'll get another two toot response and now the engine is set for Yard operation.
Repeating the exact same procedure will put the engine back into Road service.

Reset to Factory Default

To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn button quickly once, followed by five
quick taps of the Bell button, allowing approximately ½ second to lapse between each
quick button press. Two horn blasts will indicate that the engine has made the change.
Place
Horn
Engine in
Neutral
Rear
Bell Bell
Rear
Bell Bell
Horn
Bell Bell Bell
Premier E94 Crocodile Electric Engine
ENGINE IN REVERSE
=
PULL/ROAD
Bell Bell
ENGINE IN REVERSE
Bell Bell
YARD/ROAD
Bell Bell
16
Red (Austrian
version only)
Red
Rear
Rear
THEN
Reset
Two Horn Blasts
=
(indicates change is made)
Repeat to Return
to Normal Condition