Proto-Sound 3.0 Conventional Ac Operating Instructions; Activating Proto-Sound 3.0 Conventional Ac Mode Features - M.T.H. Premier E94 Crocodile Operator's Manual

Proto-Sound 3.0 Conventional AC
Operating Instructions

Activating Proto-Sound 3.0 Conventional AC Mode Features

Throttle - To increase or decrease track voltage, and therefore train speed, turn the
throttle control knob. Turning clockwise will increase voltage and speed, while turning
counterclockwise will decrease voltage and speed. The engine will maintain the speed
you set after you release the throttle until you turn it again to change the voltage and
speed.
Bell - To sound the bell, in an engine equipped with a bell firmly press and release the
Bell button. To turn the bell off, press and release the Bell button again. The bell will
continue to ring from the time you turn it on until you press and release the button
again to turn it off.
Horn/Whistle - To sound the whistle, firmly press the Horn/Whistle button. The
whistle will sound for as long as you continue to depress the button. It will stop when
you release the button.
Direction - Your train is programmed to start in neutral. The train will always cycle
neutral-forward-neutral-reverse with each press and release of the direction button.
The engine is programmed to restart in neutral each time the track voltage is turned off
for 25 seconds or more.
Manual Volume Control
To adjust the volume of all sounds made by this engine, turn the master volume control
clockwise to increase the volume and counterclockwise to reduce the volume. Turning
the master volume control completely counterclockwise will turn of all of the engine
sounds and announcements. The master volume control is located on the underside of
the chassis as shown in figure 10.
®
®
Cycle Phases
Reverse
Premier E94 Crocodile Electric Engine
Neutral
Forward
Neutral
11