Table of Contents
Advertisement
Start-up
When I apply power to the track my
engine doesn't do anything. No lights,
no sound, no nothing.
Sound
I have no sound from my engine, but
my lights are on and it moves just fine.
There's a crackling sound from my
engine
Conventional DC
Check to see if that section of track has
power. Use a voltmeter or a lit passenger car.
Slide the engine a couple of feet in either
direction, you may have a bad track section
Have you got that section electrically isolated
with a toggle switch or other device?
Check that you have the Panto/Track switch in
the correct position for your operating
environment
Check the volume pot on your tender. Full CW
= Max volume
Check to see if a screw or some other
material hasn't lodged itself in the underside
of the chassis or tender
Make sure smoke volume pot is turned full
CW
Premier E94 Crocodile Electric Engine
Solution
Solution
47
Advertisement
Table of Contents
