1.3
WASHING TROLLEYS AND ACCESSORIES
N.B: the device is supplied without the washing trolleys and instrument holder baskets.
Contact Smeg for details of the range of racks and baskets best suited to your washing
requirements.
Visit
www.smeg-instruments.com
To view the Smeg offering of WASHING ACCESSORIES, click:
Smeg WD-PRINTE printer
The appliance's RS232 port can be used to connect the external Smeg WD-PRINTE printer, supplied with its own
power transformer.
This accessory should be used only with thermal paper, 57.5mm ± 1mm, recommended weight 55 g/m
To operate this accessory, simply connect the transformer to the power socket and connect the RS232 port to the
RS232 socket on the rear of the glassware washer.
Refer to the accessory's manual for detailed instructions.
fig. 2 – RS232 cable supplied with the printer and position of the RS232 socket on the device.
User Manual
for information about the standard range of products available.
LABORATORY DIVISION -> PRODUCTS -> LABORATORY GLASSWARE WASHERS
fig. 1 – Smeg desktop printer.
GW1160 - GW4060 Series
2
.
Page 8 - 75