Detergent Level Sensors - Optional - Smeg GW1160 User Manual

6.2.2

DETERGENT LEVEL SENSORS - OPTIONAL

The appliance can be fitted with level sensors integral in the detergent intake pipe, Smeg product "WD-LS xxx" (Level
Sensor; the value of xxx may vary depending on the suction nozzle configuration required).
Contact Smeg for advice about the accessory best suited to your needs and your device.
WARNING
The electrical connection to level sensors must be made using the terminal board provided inside
the rear crosspiece (each peristaltic pump has a terminal for connection of the relative level
sensor).
This procedure must be carried out by Smeg authorised technical staff.
– Configuration with LEVEL SENSOR: Detergent suction nozzle with integral level sensor. The suction nozzle is
fig. 35
complete with filter: make sure that the filter is always correctly positioned to ensure no lumps are drawn in.
User Manual GW1160 - GW4060 Series Page 46 - 75