Hangar 9 80" CAP 232 Instruction Manual page 22

Step 6. Deflect the rudder back and forth, making sure the tail
wheel turns freely with the rudder and there is no binding. This
will also help work in the hinges.
Step 7. After the hinges are dry, check to be sure they are
securely in place by trying to pull the rudder from the vertical
stabilizer and fuselage. There should be a minimal gap between
the rudder and the vertical stabilizer.
22
Step 8. Install the tail wheel.
Note: The wheel must rotate freely with only a small amount
of side play. It may be necessary to drill out the tail wheel
slightly so the wheel will spin freely on the axle.