Advertisement
8
IMPORTANT!
[
The
To arm/disarm Partition #1:
To arm/disarm Partition #2:
To arm/disarm the entire Alarm System:
that belongs to both partitions OR
NOTE:
A users can arm/disarm only partitions allocated to him/her by the
technician (partitions #1, #2, or both).
All keypads connected to the system share the same display, even
if they are allocated to different partitions.
IMPORTANT!
Entering the Master Code +
armed will arm the other partition as well.
Entering the Master Code +
will disarm the entire system.
To arm the alarm system in HOME mode:
Press and hold
NOTES:
Since CAPTAIN-i has only one HOME state, pressing either key 7
or 4 makes no difference.
When the FAULT LED is blinking and there is no other indication
LED blinking simultaneously, the fault is 'Clock not set'.
User manual RXN-406 Keypad for CAPTAIN-i Alarm System
symbol indicates information that you must enter.
[
S
YSTEM
[
User Code
[
User Code
[
Short Code.
when one of the partitions is
when both partitions are armed
any User Code OR Short Code.
F
UNCTIONS
[
Any User Code
Advertisement
