Related Manuals for Pima N-406
Summary of Contents for Pima N-406
- Page 1 RX/N-406 LED Keypad Ver.5 Alarm System User Manual PIMA Electronic Systems Ltd. 5 Hatzoref Street, Holon 58856, Israel ℡ +972-3-5587722 +972-3-5500442 support@pima-alarms.com http://www.pima-alarms.com...
- Page 2 PIMA’s prior written consent is granted. All efforts have been made to ensure that the content of this manual is accurate. Pima retains the right to modify this manual or any part thereof, from time to time, without serving any prior notice of such modification.
- Page 3 User manual RXN-406 Keypad for CAPTAIN-i Alarm System SAFETY INSTRUCTIONS Your CAPTAIN-i alarm system has been registered in accordance with EN60950 and its rules. EN 60950 requires us to advise you the following information: 1. In this alarm system exists hazards of fire and electric shock.
- Page 4 Monitoring Station numbers ♦ Various modes of arming and disarming: keypad, key, remote control, automatic ♦ Four types of keypads: A simple LED keypad (RX/N-406), a seven segment and LED display keypad (RX-180), LCD keypads (RX/N-400 or RX/N-410) and Anti-vandal keypad RX-200 ♦...
-
Page 5: Access And Operation Codes
MS If the system is disarmed, the code will send a silent duress event to the MS The RX/N-406 keypad features 6 zone LEDs and 7 information LEDs as described in the following drawing and table (next page). -
Page 6: Led Description
User manual RXN-406 Keypad for CAPTAIN-i Alarm System LED Description Follow the drawing below, and the successive table. Zone Status: Armed Indicator: The six red lights in the The green ARMED light display area of the keypad provides the system Arm provide the zone status status as follows: RX-406... - Page 7 User manual RXN-406 Keypad for CAPTAIN-i Alarm System IMPORTANT! If the system’s red Fault LED is fleshing but NONE of the Fault LEDs in on (i.e. Memo, Bypass, Mains etc), it means the system’s clock isn’t set. NOTE: Resetting the keypad LEDs/ zones in alarm/ system memory, is possible only after the system is re-armed.
- Page 8 User manual RXN-406 Keypad for CAPTAIN-i Alarm System YSTEM UNCTIONS IMPORTANT! symbol indicates information that you must enter. To arm/disarm Partition #1: User Code To arm/disarm Partition #2: User Code To arm/disarm the entire Alarm System: Any User Code that belongs to both partitions OR Short Code.
- Page 9 User manual RXN-406 Keypad for CAPTAIN-i Alarm System To disarm the alarm system in HOME mode: any User Code To bypass/re-arm a bypassed alarm zone: Primary Code zone number NOTE: When Bypass mode is executed, it is effective until you disarm the system.
- Page 10 User manual RXN-406 Keypad for CAPTAIN-i Alarm System Press and hold simultaneously until a conformation beep from keypad. NOTE: The event is logged in memory as “Duress” and includes time and date. Reporting Fire Event to CMS: Press and hold simultaneously until a conformation beep from keypad.
- Page 11 User manual RXN-406 Keypad for CAPTAIN-i Alarm System ROGRAMMING UNCTIONS IMPORTANT! Before beginning to program the CAPTAIN Alarm System, you must first enter the Primary Code (the default factory code is 5555). There is no special indication that you are in Programming Mode. To cancel a command: , then start the programming procedure from the beginning.
- Page 12 User manual RXN-406 Keypad for CAPTAIN-i Alarm System To program User Codes #2 to #8: Primary Code (as many as the User Code number) new User Code (4-6 digits) To delete User Code #2 to #8: Primary Code (as many as the User Code number) Example: When programming or deleting User Code #6, enter the Primary Code, press the...
- Page 13 User manual RXN-406 Keypad for CAPTAIN-i Alarm System To delete a Short Code: Primary Code BACK To program system’s automatic arming time: Primary Code Hour (in HH format) Minutes (in MM format) To cancel system’s automatic arming:...
- Page 14 User manual RXN-406 Keypad for CAPTAIN-i Alarm System To program telephone numbers: Primary Code first (area code) telephone number second (area code) telephone number third (area code) telephone number NOTES: You can program up to three telephone numbers into the system memory, which will be called in an emergency or when in Alarm Mode.
- Page 15 User manual RXN-406 Keypad for CAPTAIN-i Alarm System To set the time and date for the system: Primary Code 2 digits for the current hour 2 digits for the current minutes last 2 digits of the current year 2 digits for the current month 2 digits for the current day NOTES: The time should be in HH:MM 24 hours format (e.g., 22:35).