Advertisement
14
To program telephone numbers:
[
second (area code) telephone number
code) telephone number
[
NOTES:
You can program up to three telephone numbers into the system
memory, which will be called in an emergency or when in Alarm
Mode. If you want to program only one or two telephone numbers,
then press
[
final telephone number.
If the CAPTAIN Alarm System is connected behind a PBX, you
must enter the outside line prefix digit and an asterisk before the
telephone number. For example: 9*555-5555.
When the CAPTAIN Alarm System calls to one of the programmed
phone numbers, a siren tone is heard on the subscriber telephone.
For playing a pre-recorded message, a VU-20 unit (optional) is
required. Consult your installer for this option.
To delete all private telephone numbers:
[
Code
[
User manual RXN-406 Keypad for CAPTAIN-i Alarm System
first (area code) telephone number
[
.
[
[
[
[
[
[
[
Primary Code
[
[
[
after you have programmed the
[
[
.
[
[
[
third (area
[
[
Primary
Advertisement
