Kyocera ECOSYS P4040dn Operation Manual page 121

CR Action (Carriage-Return)
This procedure instructs the printer what to do when it receives a carriage return code (0DH).
• CR Only: A carriage-return is performed (Default).
• LF and CR: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
CR Action:
* CR Only
01
02 LF and CR
03 Ignore CR
Wide A4 (Wide A4 pitch)
Turn this to On to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters
at 10 pitches) and Letter size page (80 characters at 10 pitches). This setting is only effective in PCL 6 emulation.
Wide A4:
* Off
01
On
02
XPS FitTo Page (Adjusting the XPS file print out size)
Select On in this setting to enlarge or reduce XPS files to fit the printable area during printing.
XPS FitTo Page:
* Off
01
On
02
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG files are printed directly.
1
In the Page Setting menu, press
2
Press [OK]. The CR Action screen appears.
3
Press or to select the desired action.
4
Press [OK]. The action is set and the Page Setting menu
reappears.
1
In the Page Setting menu, press
2
Press [OK]. The Wide A4 screen appears.
3
Press or to select whether Wide A4 mode is enabled.
4
Press [OK]. The wide mode setting is set and the Page Setting
menu reappears.
1
In the Page Setting menu, press
Page.
2
Press [OK]. The XPS FitTo Page screen appears.
3
Press or to select whether XPS FitTo Page mode is enabled.
4
Press [OK]. The XPS FitTo Page setting is set and the Page
Setting menu reappears.
1
In the Page Setting menu, press
Size.
4-55
Operation Panel
or to select CR Action.
or to select Wide A4.
or to select XPS FitTo
or to select TIFF/JPEG