Kyocera ECOSYS P4040dn Operation Manual page 167

SSL Setting (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt information sent and received over a network. SSL can
currently be used to encrypt data such as the WWW or FTP files widely used on the Internet so that privacy-related
information, credit card numbers, corporate secrets and other confidential information can be sent and received safely.
SSL servers use this protocol to authenticate servers and clients.
The options available in SSL Setting are as follows:
• SSL (SSL Server setting)...4-101
• IPP over SSL (SSL Server IPP over SSL setting)...4-102
• HTTPS (SSL Server HTTPS setting)...4-103
SSL Setting:
SSL
01
IPP over SSL
02
03 HTTPS
SSL (SSL Server setting)
Select the SSL server settings.
The options available in SSL are as follows:
• Off/On (SSL operation setting)...4-101
• Encryption (Encryption setting)...4-101
SSL:
01 Off/On
Encryption
02
Off/On (SSL operation setting)
Select whether or not to use the SSL server. The default setting is On.
Off/On:
Off
01
02 * On
Encryption (Encryption setting)
Select the encryption method used on the SSL server.
Note This setting is only displayed when the SSL Setting (SSL Server setting) on page 4-101 is set to On.
1
In the Network Security menu, press
Setting.
2
Press [OK]. The SSL Setting menu screen appears.
Exit
1
In the SSL Setting menu, press
2
Press [OK]. The SSL menu screen appears.
Exit
1
In the SSL menu, press
2
Press [OK]. The Off/On screen appears.
3
Press
4
Press [OK]. The SSL server setting is set and the SSL menu
reappears.
1
In the SSL menu, press
4-101
or to select Off/On.
or to select whether to use the SSL server.
or to select Encryption.
Operation Panel
or to select SSL
or to select SSL.