Kyocera ECOSYS P4040dn Operation Manual page 138

Basic (Basic settings for the optional Network Interface Kit)
This selects the basic settings for the optional Network Interface Kit (IB-50) or optional Wireless Network Interface Kit (IB-
51) network.
Basic:
TCP/IP
01
02 NetWare
AppleTalk
03
TCP/IP Settings (TCP/IP Settings for the optional Network Interface Kit)
This selects the TCP/IP settings.
The options available in the TCP/IP Settings are as follows:
• TCP/IP (Enable/Disable TCP/IP)
• IPv4 Setting (TCP/IP IPv4 settings)
• IPv6 Setting (TCP/IP IPv6 settings)
TCP/IP Settings:
01 TCP/IP
02 IPv4 Setting
IPv6 Setting
03
TCP/IP (Enable/Disable TCP/IP)
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to TCP/IP (Enable/Disable TCP/
IP) on page 4-57.
IPv4 Setting (TCP/IP IPv4 settings)
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings. For
details, refer to IPv4 Setting (TCP/IP IPv4 settings) on page 4-58.
IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings. For
details, refer to IPv6 Setting (TCP/IP IPv6 settings) on page 4-61.
4
Enter the Preshared Key using the numeric keys.
5
Press [OK]. The Encryption menu reappears.
1
In the Optional Network menu, press
2
Press [OK]. The Basic menu screen appears.
The following operations are possible:
• TCP/IP Settings (TCP/IP Settings for the optional Network
Interface Kit)...4-72
Exit
• Netware (NetWare setting)...4-73
• AppleTalk (AppleTalk setting)...4-73
• IPSec (IPSec setting)...4-73
• LAN Interface (LAN Interface setting)...4-74
• MACAddressFilter (MAC address filtering setting)...4-74
• Restart Network (Restarting the optional Network Interface Kit)...4-
74
1
In the Basic menu, press
2
Press [OK]. The TCP/IP Settings menu screen appears.
Exit
Note The number of characters is between 8 and 64. For
details on entering characters, refer to Character Entry
Method on page A-2.
or
4-72
Operation Panel
or to select Basic.
to select TCP/IP Settings.