Adjust/Maintenance; Op Functions; Software; Wired Status - Kyocera 1102TV3NL1 Operation Manual

Setup and Registration (System Menu) > System Menu

Adjust/Maintenance

[Menu] key > [▲] [▼] key > [Adjust/Maintenance] > [►] key
Adjust printing quality and conduct machine maintenance.
Item
Quiet Mode
Quiet Mode
Each Job
ColorCalibration
Registration Normal
Registration Details
Restart Printer
Service Setting

Op functions

[Menu] key > [▲] [▼] key > [Op functions] > [►] key
Item

Op functions

Software

[Menu] key > [▲] [▼] key > [Software] > [►] key
Item
Version

Wired Status

[Menu] key > [▲] [▼] key > [Wired Status]
The wired network connection status appears.
Lower print speed for quiet processing.
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
It is possible to set the use of Quiet Mode for each job. Set whether or not to permit the setting
for each job.
Value: Permit, Prohibit
This machine contains a calibration function that automatically makes adjustments to
compensate for changes that occur over time due to variations in the ambient temperature and
humidity. This function can be used for fine adjustment of tone and color drift to print in the
optimum color.
ColorCalibration (page 9-21)
If color tone does not improve or color drift does not improve after executing this color
adjustment, refer to the following:
Registration (page 9-21)
When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
Registration (page 9-21)
Restart the machine without turning the power switch off. Use this to deal with any unstable
operation by the machine. (Same as the computer restart.)
Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
You can use the optional applications installed on this machine.
Optional Applications (page 10-6)
Check the machine's system and engine software versions.
7-28
Description
Description
Description