Table of Contents
Advertisement
△ △ △ △ Operation Test
1. Before Operation Test
(1) Do not switch on power before installation is finished completely.
(2) Electric wiring must be connected correctly and securely.
(3) Cut-off valves of the connection pipes should be opened.
(4) All the impurities such as scraps and thrums must be cleared from the unit.
2. Operation Test Method
(1) Switch on power and press "ON/OFF" button on the remote controller to start the operation.
(2) Press MODE button to select the COOL, HEATER (Cooling only unit is not available), FAN to
check whether the operation is normal or not.
5. Function Operation
5-1. Operation Range (Cooling and Heater） ） ） ）
Middle East T3 Model：
Temperature
Maximum
COOLING
Minimum
Maximum
ELECTRIC
HEATER
Minimum
Indoor Air Intake Temp.
/
21℃
32℃
/
21
Outdoor Air Intake Temp
52 ℃
/
/
/
Advertisement
Table of Contents
