Broil King P3X-1 Owner's Manual page 51

D -D
ROP OWN
Solid Surface Drop-Down Side Shelf
1. Remove the cooking grids, briquets and briquet rack from
the grill.
2. Attach the Bracket Attach Assembly to the grill using the
Truss Head Screws, Flat Washers, Lock Washers, and
Nuts. See Figure 38.
3. Place the Side Shelf upside down on a clean surface and
use the four coarse-thread screws to loosely attach the
Support Brackets.
4. Place the support stiffener on the inside of the shelf using
(2) #10-16x1/2" screws to secure in place.
5. Hang the shelf brackets on the lower pins of the Bracket
Attach Assembly. Tighten the four screws to secure the
bracket arms to the shelf. See Figure 39.
6. To raise the shelf - swing it out and lift the notches over
the upper pins. Make sure the shelf is securely in position
before placing anything on it.
7. To lower the shelf - lift up on both brackets simultaneously
and pull out slightly.
B101525-2-0211
S S
IDE HELF
F 39
IGURE
I
NSTALLATION
Index Part No.
No.
1 B100561
2 B100568
2 B100559
3 B100569
3 B100560
4 B101370
5 B100993
F 40
IGURE
Description
Side Shelf
Support Bracket Front - Stainless Steel
Support Bracket Front - Black
Support Bracket Back - Stainless Steel
Support Bracket - Back - Black
Bracket Attach Assembly
Shelf Support Stiffener
F 41
IGURE
Page 51