Broil King P3X-1 Owner's Manual page 23

GRILL ASSEMBLY
Radiation Shield
Place the radiation shield in the grill bottom.
See Figure 9.
Installing Burner Bracket
Hand bend the bracket as shown in Figure 10. Insert bracket
screw in the bottom of the casting and secure with 1/4"-20
nut. Do not tighten.
Figure 10
B101525-2-0211
Figure 9
Installing the Burner
Insert the burner assembly into the grill bottom with the venturi
tubes facing the front of the grill. See Figure 11.
Slide the venturi on top of the valve assembly. Attach burner
bracket to venturi and secure it with #8-32 x 1/2" screw. Tighten
the 1/4"-20 nut inside the grill. See Figure 12.
Figure 11
Note: Bowtie burner is shown. The instructions for installing
the "H" burners is the same.
Note: If the Grill Head is installed on a PCB1 or DCB1,
make sure the burner bracket is mounted on the burner be-
fore installing it.
Figure 12
Page 23