GRILL ASSEMBLY
1. Mount grill onto cart, post or base per the mount-
ing instructions.
2. Place radiation shield (flange side up) onto four
raised bosses located on the interior bottom of the
grill. See Figure 20.
Figure 20
3. R3B model only: Slide ignitor spacer onto collector
box assembly and secure with nuts. See Figure
21.
Figure 21
Attention: Do not cut or damage ignitor wires.
B101525-2-0211
4. R3B model only: Insert collector box assembly into
hole adjacent to burner. The opening of the collec-
tor box should be facing the burner. The infrared
ignitor wire slides through the empty hole next to
the burner. See Figure 22.
Figure 22
R3B
R3
Page 33