RGBlink VENUS X3 User Manual page 92

4. Copy the program that with the suffix of ―.pkg‖
to the USB, then change the program name as ―update.pkg‖.
5. Pull out the SD card after finish the copying, then install the SD card to the
communication board, and insert the communication board to the device.
6. Plug in the power cord, start the device, then the buzzer sounds beeps, after the beeps
stop, it means the upgrade is completed.
7. After finish the upgrade, remove the SD card from the communication board, and delete
the update.pkg in SD card with card reader, then install the SD card to the communication
board, plug in the power cord and restart the device.
VENUS X3 User Manual 92