RGBlink VENUS X3 User Manual page 64

5. Communication Software Guideline
Software Operation
: Click the Out Port Swap shortcut key, or put the mouse on the output
to be adjusted, right click the mouse, select ―Out port Swap‖ to swap the out
ports.
: User can open or close the TP function, choose the output port, and
choose color bar or pure color. User need to set the red, green and blue value if
choose pure color.
: The special display project or LED display application would like to
require special resolution settings to meet the requirement. The interface is as
follows:
VENUS X3 User Manual 64