Basic Operation; Windows Setting - RGBlink VENUS X3 User Manual

5. Communication Software Guideline
Software Operation
: The link mode can achieve 5 pictures to 5 pictures seamless
switching. It needs to connect output 6 and output 8 to the corresponding DVI
inputs with two DVI cables, system default input 1 and input 2, then choose
―port 6‖ Loop To ―Input 1‖, ―port 8‖ Loop To ―Input 2‖ in the screen params
window of the windows control program.

Basic Operation

Windows Setting

New Window: In output screen zone of controlling software, press the left
mouse key and drag on the intended output screen to cover the whole current
screen. And the below interface will be displayed. A window can be opened by
click the shortcut key of ―New Window‖
, or double click the left signal
source to be shown on the window.
Paste Layer: Put the mouse on the window to be copied, right click the mouse,
select ―Copy Layer‖, then right click in output screen zone of controlling
software, and select ―paste Layer‖.
VENUS X3 User Manual 61