RGBlink VENUS X3 User Manual page 41

4. Menu Orientation
MENU
Crop: Touch <Crop>, and go to the operation interface as follows. Touch
the parameters of Width, Height X or Y, it will pop up the numeric keypad,
user can set the parameters by the numeric keypad according to actual
need, touch ―√‖ on the numeric keypad after setting.
Touch <Apply> after setting.
If image quality distorts by improper operation, it can be recover by Reset
Crop Parameters.
Signal Source Setup: Touch <Signal Source Setup>, and go to the
operation interface as follows. Choose the input signal by touching any
input and adjust the parameters. If image quality distorts by
improper operation, it can be recover by Reset Signal Source Setup.
VENUS X3 User Manual 41