Hold; Equalizer - AT&T TL86109 User Manual

Telephone operation
Options while on calls

Hold

You can place a call on hold. You hear an alert
tone at the telephone base if you have not taken
the call off of hold after 14 minutes. You hear
another alert tone at the telephone base 30
seconds later. At 15 minutes on hold, the call on
hold automatically disconnects.
To place a line 1 or line 2 call on hold:
• Press HOLD on the handset or telephone base.
L1) ON HOLD or L2) ON HOLD appears on the
handset and telephone base. The corresponding
line buttons on the handset and telephone
base flash.
To resume a line 1 or line 2 call on hold:
• Press the corresponding line button:
1 LINE/
FLASH
or 1 LINE or 2 LINE on the telephone base.
To place a cell call on hold:
Press HOLD on the handset or telephone base.
•
CL) ON HOLD appears on the handset and
telephone base.
CELLULAR
To resume a cell call on hold:
• Press CELL on the handset or CELLULAR
NOTE: When two or more handsets, or one or more handsets and the base are on a call,
if you press HOLD, you will be disconnected from the call. The call continues on the other
system phones.

Equalizer

The equalizer feature on the handset enables you to change
the quality of the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press EQ to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset. The
current setting is shown on the handset for two seconds.
NOTES:
• The equalizer feature does not apply to the telephone base or the
connected Bluetooth headset.
• If you switch the call between the handset and speakerphone by pressing
the audio setting remains unchanged.
• The current equalizer setting remains unchanged until a new setting is selected.
or 2 LINE/
FLASH
CELL on the handset and
on the telephone base flash.
on the handset,
77
on the telephone base.
/SPEAKER,