AT&T TL86109 User Manual page 92

Multiple handset use
Intercom
To mute while on an intercom call:
• Press the MUTE softkey on the handset or telephone base. Its screen
displays Microphone off for a few seconds.
To end an intercom call at the destination handset:
• Press OFF/
back in the charger. Both screens display Intercom ended.
To end an intercom call at the telephone base:
• Press the END softkey or return the corded handset to the telephone base.
Both screens display Intercom ended.
NOTES:
• You can cancel the intercom call before it is answered by pressing
your originating handset.
• If the destination handset or telephone base does not answer the intercom call
within 100 seconds, or if the device is in the directory or call log, or out of range, the
originating handset displays Unable to call. Try again. and returns to idle mode.
• You can use a maximum of five handsets at a time. For example, when four handsets
are used on intercom calls, use another handset for an outside call. When two handsets
are used on an intercom call, you can use three other handsets for an outside call.
Using the telephone base:
1. Press the MENU softkey on the telephone base in idle mode.
2. Press DIR, CID, /DELETE or /REC to highlight
Intercom, then press the SELECT softkey.
• If you have only one cordless handset, the telephone
base displays Calling handset. The handset rings and
displays Base is calling while 1 LINE/
2 LINE/
FLASH
• If you have two or more cordless handsets, the
telephone base displays INTERCOM TO:
– Press DIR, CID, /DELETE or /REC to
choose a destination handset, then press the SELECT softkey.
-OR-
Press 1-9 for HANDSET 1-9, *0 for HANDSET 10, *1 for
HANDSET 11 or *2 for HANDSET 12, and then press the SELECT
softkey to initiate an intercom call.
The telephone base displays Calling handset X. The destination
handset rings and displays Base is calling while 1 LINE/
2 LINE/
FLASH
or the END softkey, or place either cordless handset
CLEAR
flash.
flash.
and
FLASH
86
OFF/
on
CLEAR
Directory
Cal l log
Bluetooth
Intercom
SELECT
INTERCOM TO:
HANDSET 1
HANDSET 2
HANDSET 3
BACK SELECT
and
FLASH