Telephone Base Settings; Ringer Volume - AT&T TL86109 User Manual

Telephone settings

Telephone base settings

Ringer volume

You can select the ringer volume for incoming calls on line 1 or line 2 and
the cell line.
To adjust the telephone base ringer volume:
1. Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or /REC to highlight
2.
Ringers, then press the SELECT softkey.
Press the SELECT softkey to choose Ringer volume.
3.
4. Press DIR, CID, /DELETE or /REC to select
All lines, Line 1, Line 2, Cell A or Cell B, then press
the SELECT softkey to confirm.
5. Press DIR, CID, /DELETE or /REC to adjust the
ringer volume. A sample of each ringer volume plays as
you scroll through the choices.
-OR-
Press the OFF softkey to turn off the ringer. The telephone base displays
Ringer mute.
Press the SET softkey to confirm. You hear a confirmation tone.
6.
-OR-
VOLUME
1. Press
while the telephone base is in idle mode to
set the ringer volume for all lines.
Press the SET softkey to confirm and you
2.
hear a confirmation tone.
-OR-
Press the OFF softkey to silence the
ringer volume.
NOTES:
• Changing the telephone base ringer volume does not affect the handset ringer volume.
For more information on handset ringer volume, see page 31.
• When the ringer volume of line 1 or line 2 is set to off, the telephone base displays
Ringer off for the corresponding line. When the ringer volume of Cell A or Cell B is set
to off, the telephone base displays Ringer A off or Ringer B off, respectively. When the
ringer volume of all cell calls is set to off, the telephone base displays Ringers off.
to set the ringer volume
41
RINGERS
Ringer volume
Ringer tone
SELECT
RINGER VOLUME
Al l lines
Line 1
Line 2
SELECT
RINGER VOLUME
Phone memory
OFF SET