Quick start guide
TL92271/TL92371/TL92471
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your user's manual
provided in the package, or see the online user's manual at
www.telephones.att.com/manuals.
Telephone base and charger installation
Plug one end of the
Plug the power adapter into
telephone line cord into
a power outlet not controlled
a telephone wall jack.
by a wall switch.
A DSL filter (not included)
is required if you have
DSL high-speed Internet
service.
The DSL filter must
Route the power
adapter cord through
be plugged into the
telephone wall jack.
this slot.
Route the telephone line
Raise the
cord through this slot.
antenna.
Plug the power cord and
the telephone line cord into
the jacks.
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
www.telephones.att.com
1 (800) 222-3111
our website at
or call
1 (866) 288-4268
Canada, dial
.
Battery installation
Install the battery as shown below. Charge your handset(s) before initial use.
The battery is fully charged after 16 hours of continuous charging.
Step 1
Step 2
Plug the battery connector
Align the cover flat
securely into the socket
against the battery
inside the handset battery
compartment, then
slide it upwards until it
compartment. Insert the
clicks into place.
supplied battery with the
label THIS SIDE UP facing
up as indicated.
CHARGE light
Step 3
Charge the handset by placing it face forward in
the telephone base or charger. The CHARGE light
on the top of the handset is on during charging.
Use only the supplied rechargeable battery or replacement battery (model BT166342).
Quick reference guide - handset
Softkeys (2)
DIR /VOLUME
•
Show the menu.
•
Scroll up in menus.
•
Select an item or save an entry
•
Increase listening volume when
or setting.
on a call or message playback.
•
Show directory entries.
CHARGE light
•
Move the cursor to the left
•
On when the handset is
while entering names or
charging.
numbers.
CELLULAR
MUTE/DELETE
•
Make or answer a cell call.
•
Mute the microphone during
a call.
•
Answer a call waiting call
during a cell call.
•
Delete digits while predialing.
•
Delete an individual entry
HOME/FLASH
while reviewing the redial list,
directory or caller ID history.
•
Make or answer a home call.
•
Erase a digit or character while
•
Answer a call waiting call
entering or editing a directory
during a home call.
entry.
•
Silence the ringer temporarily.
1
•
Delete a message or
•
Press repeatedly to add or
announcement during message
remove 1 in front of the call
or announcement playback.
log entry before dialing or
saving it to the directory.
TONE
•
Cancel an operation, back up
•
Switch to tone dialing
to the previous menu, or exit
temporarily during a call if you
the menu display while using
menus.
have pulse service.
•
Toggle the name order when
•
Press and hold to return to idle
saving a caller ID log entry into
mode.
. In
directory.
•
Hang up a call.
•
Press and hold to erase all the
/SPEAKER
Missed calls or Download fail
•
Make or answer a home or cell
messages.
call using the speakerphone.
•
Silence the ringer temporarily.
•
Switch between the
speakerphone and the handset.
CID /VOLUME
•
Scroll down in menus.
REDIAL/PAUSE
•
Decrease listening volume
•
Press repeatedly to view the
when on a call or message
last 10 numbers dialed.
playback.
•
Press and hold to insert a
•
Show caller ID history.
dialing pause while entering
•
Move the cursor to the right
numbers.
while entering names or
numbers in the directory.
EQ
•
During an outside call,
# (pound key)
intercom call, message or
•
Press repeatedly to display
announcement playback, press
other dialing options when
to change the quality of the
reviewing a caller ID history
audio to best suit your hearing.
entry.
PUSH TO TALK
•
Press to display the PTT menu to begin a
PTT call.
•
Press and hold to begin a one-to-group
broadcast when the handset is not in use.
Quick reference guide - telephone base
/ANS ON
•
Press to turn the
answering system on
or off.
/HANDSET LOCATOR
•
Press to page all system
handsets.
•
Press and hold to begin
handset deregistration.
/REPEAT
•
Press to repeat a
message or press twice
to play the previous
message.
OFF/CANCEL
Message counter
•
Number of messages
(or during playback,
message number
currently playing).
IN USE light
•
On when the handset
is in use, when the
answering system is
answering an incoming
call, or when you are
registering a handset.
Initial settings
We recommend you program your telephone system before use.
/PLAY/STOP
The following are a few examples of common features to set before using the
•
Press to play
telephone. Refer to the Handset settings and Answering system settings in the
messages.
user's manual for detailed instructions on setting all telephone features.
•
Press to stop
message playback.
Set date/time
Set the date/time before using the answering system.
Using a cordless handset:
-> q or p -> Set date/time -> SELECT.
1.
MENU
X/DELETE
2. Enter the month, day and year using the dialing keys -> SET.
•
Press to delete the
3. Enter the hour and minute using the dialing keys.
message currently
playing.
4. q or p to choose AM or PM -> SET.
•
When the phone
Record your own announcement
is not in use, press
twice to delete all
Your outgoing announcement plays when calls are answered by the answering
previously reviewed
system. You can use the preset announcement to answer calls, or replace it
messages.
with your own recorded announcement.
Using a cordless handset:
/SKIP
1.
MENU
-> q or p -> Answering sys -> SELECT.
•
Press to skip to the
2.
SELECT
to select Announcement -> RECORD.
next message.
3. Facing the handset, record your announcement and press
recording.
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5
or 6 rings, or toll saver. If you choose toll saver, the answering system answers
a call after two rings if you have new messages, or after four rings when there
are no new messages.
DEVICE1/DEVICE2 lights
If you want the built-in answering system instead of the voicemail to answer a
•
On when the telephone
call, you should set the answering system to answer a call at least two rings
base is paired and
connected with a Bluetooth
before the voicemail is set to answer. Contact your telephone service provider
device.
for information on your voicemail settings.
Using a cordless handset:
1.
MENU
-> q or p -> Answering sys -> SELECT.
2. q or p -> Ans sys setup -> SELECT.
3. q or p -> # of rings -> SELECT.
4. q or p -> choose among 6, 5, 4, 3, 2 or Toll saver -> SET.
Ringer volume
You can set the ringer volume level to one of the six levels or turn the
ringer off.
Using a cordless handset:
1.
MENU
-> q or p -> Ringers -> SELECT.
VOLUME
2.
SELECT
to select Ringer volume.
•
Press to adjust the volume during
3. q or p -> All lines, Home, Cell-D1 or Cell-D2 -> SELECT.
message playback.
4. q or p to choose the desired level -> SET.
•
When the phone is not in use, press
to adjust the telephone base ringer
volume.
STOP
to end