Making Internal Scsi Bus Connections; Internal Scsi Ribbon Cable To Host Adapter - LSI LSI22910 User Manual

2.2.4 Making Internal SCSI Bus Connections

2-8
This section provides step-by-step instructions about making internal
SCSI bus connections.
Step 1. To connect an internal SCSI device, plug the 68-pin connector
on one end of a wide internal SCSI ribbon cable into the
connector J4 or J5. See the example in
Figure 2.4

Internal SCSI Ribbon Cable to Host Adapter

Installing the LSI22910
Figure 2.4.