Internal Scsi Ribbon Cable To Host Adapter - LSI LSI21002 User Manual

2.2.3.1 Making Internal SCSI Bus Connections
2-8
This section provides step-by-step instructions about making internal
SCSI bus connections:
Step 1. To connect an internal SCSI device, plug the 68-pin connector
end of a wide internal SCSI ribbon cable into connector J2 or
J5. See the example in
Figure 2.4

Internal SCSI Ribbon Cable to Host Adapter

J2
Installing the LSI21002
Figure 2.4.
J5
J3
J4