Delete A Route - Lowrance GlobalMap 7200C Operation Instructions Manual

Route creation sequence (left to right): Fig. 1. Set route waypoint (1) at
11th St. & 145th Ave. Fig. 2. Move cursor north to set point (2) at 145th
& Admiral. Fig. 3. With point (2) set, move cursor east to mark inter-
state on-ramp with waypoint (3). In figures 2 and 3, notice the rubber
band line extending from the previously set waypoint to the cursor.
This line will become the course for the route.
4.
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp
turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading
to river. Waypoint (5) ends the route at a tree stand in the hunting
area. Fig. 6. Press EXIT to save the route and you return to this screen.
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
6. Repeat step five until the route reaches your destination.
7. To save your route, press
screen, with the route automatically named "Route 1" and stored in the
GlobalMap's internal memory (In our example, Route 1 already existed,
so the unit automatically made "Route 2.").
You can edit the route and run other commands, but if you are finished
with the route for now, return to the last page displayed by pressing
repeatedly.
EXIT

Delete a Route

1. From the
N
| |
MENU MENU
2. Press to route name|
↓
3. Press to
↓
N
1.
, press
P
AVIGATION AGE
to
↓
R P
OUTE LANNING
ENT
| to
→
AVIGATE
2.
5.
ENT
. The unit reverts to the Edit Route
EXIT
|
MENU ENT
| .
ENT
.
| |
←
D ENT
ELETE
65
to set the next waypoint.
or from the
to | .
Y ENT
ES
3.
6.
press
M P
AP AGE