To Overlay Information On Your Screen - Lowrance GlobalMap 7200C Operation Instructions Manual

commands is that Customize changes only the digital data boxes on
a screen, and Overlay Data changes only the information floating
on the screen without a box. See Customize Page Displays, on page
79 for information on customizing data boxes.
Overlay Data highlighted on GPS menu (left). The Data Viewer menu

To overlay information on your screen:

1. While on the Navigation Page or a Map Page, press
|
D ENT | ENT
LAY ATA
2. You'll see a list of the overlay data currently shown on the screen, if
any overlay data has been chosen for display. Select
press . The data viewer shows information categories with "+" or "–"
ENT
symbols next to each category name. A category with a "+" next to it is
expandable, meaning its contents are hidden.
Selecting the category name and pressing
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents. Just
select the category name and press
3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press
uncheck it (turn off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press
page display.
with the Navigation category expanded.
.
will show the category's
ENT
.
ENT
to check it (turn on) and
ENT
EXIT
94
|↓ to
MENU
(E
NTER TO ADD
| to return to the
EXIT
O
VER-
and
)