Lowrance GlobalMap 7200C Operation Instructions Manual page 62

NOTE:
If you are already located at or near the beginning of your trail, the
arrival alarm will go off as soon as you hit Enter. Just press
clear the alarm.
5. Begin moving and let your GlobalMap guide you.
6. When you reach your destination, be sure to cancel your navigation:
press |
MENU MENU
sure. Press |
←
Figure 3.
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
On the Map Page, the trail you are navigating is represented by a dotted
line that alternates with a flashing solid line. The Navigation Page will also
show the navigated trail as a dotted line. The bearing arrow on the compass
rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a waypoint. The
bearing arrow on the compass rose will swing around and point to the
next trail waypoint. Press
| to
↓
C
ANCEL
.
ENT
Figure 1.
to a "route" when you navigate the trail.
EXIT
|
N ENT
AVIGATION
to clear the alarm.
54
. The unit asks if you're
Figure 2.
Figure 4.
to
EXIT