Delete A Route; Save Gps Data Files To An Mmc - Lowrance iFINDER PhD Operation Instructions Manual

4.
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp
turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading
to river. Waypoint (5) ends the route at a tree stand in the hunting
area. Fig. 6. Press EXIT to save the route and you return to this screen.
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
6. Repeat step five until the route reaches your destination.
7. To save your route, press
with the route automatically named "Route 1" and stored in iFINDER's
internal memory.
8. You can edit the name if you wish. Press ↑ to select the screen's
command box, then press → to
the first character, then press → to move the cursor to the next charac-
ter and repeat until the name is correct, then press
9. You can execute other route commands, such as
command box active, just press → to highlight a different command,
then press
ENT
10. If you are finished with the route for now, you can return to the
last page displayed by pressing

Delete a Route

1. Press
MENU
2. Press ↓ to the route list|↓ or ↑ to select route name|
3. Press ← to

Save GPS Data Files to an MMC

1. Press
MENU
| .
D ENT
ATA
2. The Transfer My Data menu includes a message which tells you if an
MMC is present. If no MMC is present, you must first insert a card into
iFINDER in order to activate the Save command.
5.
.
| |↓ to
MENU R
| |← to
D ENT
ELETE
| |↓ to
MENU
ENT
. iFINDER reverts to the Route screen,
EXIT
|
E N
DIT AME
EXIT
|
P
OUTE LANNING
| .
Y ENT
ES
S S
YSTEM ETUP
49
6.
to set the next waypoint.
. Press ↑ or ↓ to change
ENT
.
ENT
N
AVIGATE
| | .
EXIT EXIT
.
ENT
ENT
| |↓ to
ENT
. With the
.
T M
RANSFER Y