Trails; Delete A Trail - Lowrance GlobalMap 7200C Operation Instructions Manual

Navigating along a route: Fig. 1 shows the GlobalMap Navigation Page
at the start of a route, heading straight for the first waypoint (Wpt 1). In
Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been trig-
gered and the bearing arrow on the compass rose has turned to point
east, toward Wpt 2. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.15 miles away. Fig. 4
shows route navigation on the Map Page. In this figure, the traveler has
reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.

Trails

Delete a Trail

This is the command used to erase or delete a trail:
Press |
MENU MENU
|
T ENT
LETE RAIL
Tip:
You can also delete all trails at once:
1. Press
MENU
2. Press
→
Figure 1.
Figure 3.
| to
↓
M T
Y
| to |
←
Y ENT
ES
| |↓ to
MENU
to |
D A
ELETE LL
| | to trail name|
↓
ENT
RAILS
.
|
M T ENT
Y RAILS
| to |
←
ENT Y
ES
68
Figure 2.
Figure 4.
ENT
.
.
ENT
| to
→
D
E-