Lowrance GlobalMap 7200C Operation Instructions Manual page 149

Mapping gps receivers
Table of Contents

Advertisement

Calibrate is highlighted on the device configuration menu (left). Cali-
bration menu (right) with calibration instructions listed at the top.
3-Point Calibration
3-point calibration is designed for tanks that vary in shape from the top
to the bottom. You can begin calibration at any point in the 3-point
process, but we recommend starting calibration with an empty tank.
In a 3-point calibration, you will set three points, one each for empty,
half and full levels.
1. Press
MENU| MENU
2. Highlight
B
ration menu. A list of network devices will be at the top of the page. 3.
Select the EP-15 Fluid Level and press
4. Press ↓ to select
menu will appear.
5. Highlight
N
6. Make sure your tank is empty, then highlight
.
ENT
Select E
MPTY LEVEL
7. Select
C
ALIBRATE
Empty Level Calibration Completed. Press
8. Add half a tank of fuel, highlight
and press
H
ALF LEVEL
9. Select
C
ALIBRATE
Half Level Calibration Completed. Press
10. Fill up the tank, then highlight
and press
F
ULL LEVEL
11
Highlight
.
pear: Full Level Calibration Completed. Press
peatedly to get back to the main display.
, use ↓ ↑ to select
and press
S
US
ETUP
C
ALIBRATE
, press
P
ENT
UM
TS
and press ENT.
and press ENT
ENT.
and press
ENT.
and press
C
ALIBRATE
NMEA 2000
, which will open the Bus Configu-
ENT
.
ENT
and press
ENT
and select
. Press
3
. The following message will appear:
ENTER
F
L
LUID
. The following message will appear:
ENT
ENT
F
L
LUID
. The following message will ap-
ENT
141
and press
. The Device Calibration
.
ENT
F
L
LUID
EVEL
.
and press
EVEL
.
and press
EVEL
, then press
ENT
.
ENT
and press
. Select
ENT
. Select
ENT
re-
EXIT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents