Bennett Trim Tabs Calibration - Lowrance GlobalMap 7200C Operation Instructions Manual

3. Highlight
A
and press
TION
re-calibrate the device?
4. Highlight
Y
main display.

Bennett Trim Tabs Calibration

Trim Tabs will be calibrated through their Device Configuration menu.
To calibrate Trim Tabs:
1. Press
MENU
devices will appear.
2. Select
B
ENNETT
the Trim Tab Device Configuration menu.
3. Highlight
C
will appear with a list of calibration instructions.
4. Select
S
TART
appear: Please fully raise Trim Tabs.
5. After fully raising the trims tabs, press
will appear: Please fully lower trim tabs.
6. After fully lowering the trim tabs, press
message will appear. Press
main display.
Reset Calibration highlighted (left). Reset Calibration confirmation
To Reset Calibration:
1. Press
MENU
2. Highlight
F
3. Highlight
E
NGINE
with up to four options: All Engines, Port, Center and Starboard. Selecting All
Engines will reset calibration for all engines back to factory defaults.
O
DVANCED PTIONS
. The following message will appear: Do you wish to
ENT
and press
ENT
ES
| , select
MENU
from the list and press
T T
RIM ABS
and press
ALIBRATE
and press
C
ALIBRATION
| , select
MENU
M
UEL ANAGEMENT
and press
S
ELECT
and press
ENT
. Press
EXIT
and press
B S
US ETUP
. The Device Calibration window
ENT
ENT
. Press
ENT EXIT
window (right).
and press
NMEA 2000
and press
ENT
. The Engine Select menu will appear
ENT
145
. Select Reset
repeatedly to get back to the
. A list of network
ENT
, which will open
ENT
. The following message will
. The following message
ENT
. A Calibration Complete
ENT
repeatedly to return to the
.
ENT
.
T C
RIM ALIBRA-