Satellite Status Page - Lowrance GlobalMap 7200C Operation Instructions Manual

Trip Calculator command: shows trip status and statistics.
Timers command: controls the up timer, down timer and alarm clock
settings.
Browse Files command: this allows you to view the installed MMC card
and the files it contains.
Pages
The unit has four Page displays that represent the four major operating
modes. They are the Satellite Status Page, the Navigation Page, the Map
Page and Radar Page (for more information on Radar see additional ma-
terials). They are accessed by pressing the
to select a Page (Clear the Pages Menu by pressing
Pages Menu showing some Map display options.

Satellite Status Page

The Satellite Status Page, shown, provides detailed information on the
status of the GlobalMap's satellite lock-on and position acquisition. To
get to the Satellite Status Page: Press the
to select
S
TATUS
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed. The Sat-
ellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!
(Clear the Pages Menu by pressing
PAGES
PAGES
32
key, then using
.).
EXIT
key, then use
.).
EXIT
or ←
→
or ←
→