Starting The Engine With Starter Button - KYMCO VISA R 110 Owner's Manual

SECTION 3 - OPERATION

Starting the engine with starter button

To start your VISA R 110 motorcycle, follow the procedure
listed on the following pages.
To prevent damage to the starter motor, do not operate the
starter motor for more than five seconds at a time. If the
motorcycle fails to start immediately, check the fuel level and
the battery condition, and allow the starter motor to cool
before attempting to start the engine again. Do not press the
starter button once the engine is running or the starter
motor and engine can be damaged. To prevent damage to
the catalytic converter in the motorcycle's exhaust
system, avoid idling for extended periods of time, and do
not use leaded gasoline.
Your motorcycle's exhaust emits poisonous carbon
monoxide gas. High levels of carbon monoxide can collect
rapidly in enclosed areas such as a garage.
Do not run the motorcycle's engine with the garage door
closed. Even with the door open, run the engine only long
enough to move your motorcycle out of the garage.
NOTE: Always check the engine oil level and the fuel
level BEFORE attempting to start your motorcycle's
engine
1. Use the ignition key to unlock the steering lock on the
steering
2. Turn the ignition switch to "ON".
19