Stopping &Parking Your Motorcycle - KYMCO VISA R 110 Owner's Manual

SECTION 3 - OPERATION
Stopping &Parking your motorcycle
Use care when concluding your ride and parking your
motorcycle.
1. To alert other drivers in plenty of time, use your turn
signal in advance of your intended turn.
2. Use your mirrors and turn your head in order to see
other vehicles that are to your side or behind you.
3. Reduce your speed by closing the throttle and then
apply both the front  brake and rear  brakes evenly
and smoothly. As you brake, the motorcycle's brake light
will illuminate.

4. Remember to return the turn signal switch to the
center (off) position after completing your stop.
5. After you have come to a full stop, turn the ignition
switch to the "OFF" position.
Never operate the ignition switch while riding. Doing
so will result in a sudden loss of power to your
motorcycle and could cause you to lose control. Only
operate the ignition switch after the motorcycle has
come to a complete and safe stop.
Always park your the motorcycle on firm, level ground

to help prevent it from falling over.
If you must park on an incline, aim the front of your
motorcycle uphill, and place it on the center stand.
27