Example Of Qlogic Output - IBM TotalStorage DS6000 Attachment Manual

driver. The directory /proc/scsi/ <driver name> / <adapter number> will provide the
information for a specific adapter/port. See Figure 64 for an example of QLogic
output and Figure 65 on page 128 for an example of Emulex output.
[root@denethor root]# cat /proc/scsi/qla2310/2
QLogic PCI to Fibre Channel Host Adapter for ISP23xx:
Firmware version: 3.01.18, Driver version 6.04.02
Entry address = 0x4d8000
HBA: QLA2312 , Serial# H88769
Request Queue = 0x210ec000, Response Queue = 0x21100000
Request Queue count= 128, Response Queue count= 512
Total number of active commands = 0
Total number of interrupts = 4008395
Total number of IOCBs (used/max) = (0/600)
Total number of queued commands = 0
Device queue depth = 0x10
Number of free request entries = 128
Number of mailbox timeouts = 0
Number of ISP aborts = 90
Number of loop resyncs = 300
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state= <DOWN>, flags= 0x860813
Dpc flags = 0x0
MBX flags = 0x0
SRB Free Count = 4096
Port down retry = 30
Login retry count = 30
Commands retried with dropped frame(s) =0
SCSI Device Information:
scsi-qla1-adapter-node=200000e08b0c2109;
scsi-qla1-adapter-port=210000e08b0c2109;
scsi-qla1-target-0=5005076300c6a3bb;
scsi-qla1-target-1=200500a0b80f0a15;
scsi-qla1-target-2=5005076300c6a6b8;
scsi-qla1-target-3=5005076300c2a6b8;
scsi-qla1-target-4=5005076300cfa6b8;
SCSI LUN Information:
(Id:Lun)
( 4: 0): Total reqs 7, Pending reqs 0, flags 0x0, 1:0:81,
( 4: 1): Total reqs 7132, Pending reqs 0, flags 0x0, 1:0:81,
( 4: 2): Total reqs 7414, Pending reqs 0, flags 0x0, 1:0:81,
( 4: 3): Total reqs 2948, Pending reqs 0, flags 0x0, 1:0:81,
...
Figure 64. Example of QLogic Output:
Chapter 12. Attaching to an Intel host running VMware ESX server
127