Downloading The Current Emulex Adapter Driver For A Novell Netware Host; Installing The Emulex Adapter Driver For A Novell Netware Host; Downloading The Current Qlogic Adapter Driver For A Novell Netware Host - IBM TotalStorage DS6000 Attachment Manual

v Target and private initiator
1. Record the IEEE number that is printed on the card. You can use the IEEE
2. Refer to the installation instructions provided by your host adapter vendor for
Downloading the current Emulex adapter driver for a Novell NetWare
host
This section provides instructions for downloading the current Emulex adapter driver
for a Novell NetWare host.
1. Plug in and restart your host system.
2. Go to http://www.ibm.com/servers/storage/disk/ds6000/interop.html.
3. Click Interoperability matrix.
4. Click DS6000 interoperability matrix.
5. Find the section for the current version of the driver and firmware and driver you
6. Go to http://www.emulex.com
7. Click Drivers, software and manuals from the left navigation pane
8. Select IBM from the drop down vendor list.
9. Click the link for the name and version of the adapter driver you want to

Installing the Emulex adapter driver for a Novell NetWare host

This topic provides installation steps for installing the Emulex adapter driver on a
Novell NetWare host.
If you are installing the fibre-channel adapter for the first time, you must specify the
correct topology. You must also select the appropriate device mapping driver.
1. Go to www.emulex.com.
2. Click drivers, software and manuals in the left navigation pane.
3. From the Drivers, software and manuals by operating system section, click
4. Click Installation to get the documentation that tells you how to install the
5. Once you have installed the driver from the NetWare server console, enter the
6. Click NCF Files Options.
7. Select Edit STARTUP.NCF file.
8. Insert the following statement at the beginning of the STARTUP.NCF file: SET
9. Find the LOAD statement for the LPFC.HAM driver and ensure that it reads as
Downloading the current QLogic adapter driver for a Novell NetWare
host
This section provides instructions for downloading the current QLogic adapter driver
for a Novell NetWare host.
1. Go to http://www.ibm.com/servers/storage/disk/ds6000/interop.html.
136
DS6000 Host Systems Attachment Guide
number to determine the WWPN.
their specific installation instructions. See http://www.emulex.com for the latest
documentation.
want.
download.
NetWare.
adapter driver.
following command: nwconfig. This command applies to NetWare 5.0 or later.
MULTI-PATH SUPPORT=OFF
follows: LOAD LPFC.HAM SLOT=XXXX TOPOLOGY=1 /LUN MAX_LUN=32 RSCNZONE=1