Recommended Configurations For Ibm Iseries Hosts; Example Of The Logical Hardware Resources Associated With An Iop - IBM TotalStorage DS6000 Attachment Manual

v Cisco: A list of supported environments (servers, operating systems, and

Recommended configurations for IBM iSeries hosts

This topic provides recommended configurations for IBM iSeries hosts.
You can use the following configurations for each feature code:
v For feature code 2766:
v For feature code 2787:
Figure 33 shows an example of the display for the HSM logical hardware resources
associated with the IOP.
Figure 33. Example of the logical hardware resources associated with an IOP
Figure 34 on page 63 shows an example of the display for the HSM auxiliary
storage hardware resource detail for the storage unit.
62
DS6000 Host Systems Attachment Guide
adapters) and hardware and software prerequisites for the Cisco is available at
http://www.cisco.com/ibmsan/cisco/index.html.
– Install feature code 2766, which is an I/O adapter card, in the IBM iSeries
system unit or in the high-speed link (HSL) PCI I/O towers.
– Install only one 2766 adapter per I/O processor (IOP) because it requires a
dedicated IOP. No other I/O adapters are supported under the same IOP.
– Install only two 2766 adapters per a multiadapter bridge.
– Install feature code 2787, which is an I/O adapter card, in the IBM iSeries
system unit or in the high-speed link (HSL) PCI I/O towers.
– Install only one 2787 adapter per I/O processor (IOP) because it requires a
dedicated IOP. No other I/O adapters are supported under the same IOP.
– Install only two 2787 adapters per a multiadapter bridge.
Opt Description
Combined Function IOP
Storage IOA
Disk Unit
Disk Unit
Disk Unit
Type-Model Status
2843-001 Operational
2766-001 Operational
1750-A82 Operational
1750-A81 Operational
1750-A81 Operational
Resource Name
CMB04
DC18
DD143
DD140
DD101