Parameter Settings For The Emulex Lp9002L Adapter; Example Of A Start Lpfc Auto-Generated Configuration - IBM TotalStorage DS6000 Attachment Manual

Parameter settings for the Emulex LP9002L adapter

|
|
|
| |
http://knowledge.storage.ibm.com/servers/storage/support/hbasearch/interop/hbaSearch.do
|
24
DS6000 Host Systems Attachment Guide
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=1 lun=0;
name="sd" parent="lpfc" target=2 lun=0;
name="sd" parent="lpfc" target=3 lun=0;
name="sd" parent="lpfc" target=4 lun=0;
name="sd" parent="lpfc" target=5 lun=0;
name="sd" parent="lpfc" target=6 lun=0;
name="sd" parent="lpfc" target=7 lun=0;
name="sd" parent="lpfc" target=8 lun=0;
name="sd" parent="lpfc" target=9 lun=0;
name="sd" parent="lpfc" target=10 lun=0;
name="sd" parent="lpfc" target=11 lun=0;
name="sd" parent="lpfc" target=12 lun=0;
name="sd" parent="lpfc" target=13 lun=0;
name="sd" parent="lpfc" target=14 lun=0;
name="sd" parent="lpfc" target=15 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2;
name="sd" parent="lpfc" target=17 lun=3;
Figure 5. Example of a start lpfc auto-generated configuration
4. Type either:
a. reboot -- -r from the Open Windows window to shutdown and restart the
PRIMEPOWER host system with the kernel reconfiguration option
b. boot -r from the OK prompt after you shutdown
The fibre-channel adapters that are supported for attaching the storage unit to a
PRIMEPOWER host are capable of full-fabric support. Ensure that all
fibre-channel driver configurations include worldwide port name, worldwide node
name, port ID, or host adapter binding of target LUN pairs.
Binding of target LUN pairs implements the PRIMEPOWER fibre-channel host
adapter configuration file that is installed by the adapter software package.
Refer to the manufacturer's adapter documentation and utilities for detailed
configuration instructions.
You can tune fibre-channel host adapter configuration files for host system
reliability and performance.
You can use these recommended configuration settings for your Emulex adapter on
a PRIMEPOWER host system.
Table 1 on page 25 provides configuration settings that are recommended for the
Emulex LP9002L adapter. For the most current information about fibre-channel
adapter parameter settings, see: