Oki C810 Maintenance Manual page 124

Oki Data CONFIDENTIAL
Option Adjustment
12 Destina- Sets or checks the (CU) destination, device
tion/ PnP identification and USB identification.
information
setup
13 Consuma- Checks the current consumable counter values.
ble counter
display
14 Menu setup Displays the menu settings set on the printer
check (CU).
15 Print Checks the Mac address and each firmware
information version.
check
16 Memory Checks the information on the CPU and memory
value check installed on the printer (CU).
17 Test print Executes the local print function and sends a
specified file.
Purpose: To check the printer on a stand-alone
basis and send a download file.
18 Switch scan Executes the switch scan test.
test Purpose: To check each sensor for proper
operation.
19 Motor clutch Executes the motor clutch test.
test Purpose: To check each item, such as a motor
or clutch, for proper operation.
44015503TH Rev. 1
Section in Operation from
Maintenance operator panel
Option
Utility (section in this
operation maintenance
manual manual)
2.4.1.2.9 5.4.3 20 Color
registration
adjustment
test
2.4.1.3.1 5.1 (ENG 21 Density
STATUS adjustment
PRINT) test
2.4.1.3.2 Print a 22 Auto density
configuration adjustment
report (Menu control
Map) (refer parameter
to User's setting
Manual). (must not
be used)
2.4.1.3.3 Print a
configuration 23 Counter
report (Menu display
Map) (refer
24 Local
to User's
parameter
Manual).
setting
2.4.1.3.4 Print a
25 Engine
configuration
parameter
report (Menu
setting
Map) (refer
26 Media
to User's
transfer
Manual).
parameter
2.4.1.4.1 Perform local
setting
printing (refer
to System
Specification).
Note! Do not operate or set options marked with 'Never use this option', or a
2.4.1.5.1
2.4.1.5.2
Adjustment
Executes the color registration adjustment test.
Executes the density adjustment test.
Sets the auto density setting control parameter.
Checks the consumable, continuous
consumable and waste toner counter values.
Switches between the Factory and Shipping
modes and checks the status of the fuse.
Makes an engine parameter setting.
Makes a print media transfer parameter setting.
malfunction is potentially caused.
5. MAINTENANCE MENUS
Section in Operation from
Maintenance operator panel
Utility (section in this
operation maintenance
manual manual)
2.4.1.5.3
2.4.1.5.4
Never use
this option.
2.4.1.5.6
2.4.1.5.7
2.4.1.5.8
2.4.1.5.9
123 /