Oki C810 Maintenance Manual page 173

Oki Data CONFIDENTIAL
ON Inspec-
Display on operator panel LINE tion
lamp lamp
Replace the fuser. Off Blink Informs the image drum has reached end of line.
It is lifetime of Fuser.
For details please see Help.
Replace the Belt. Off Blink Informs that the transfer has reached end of line.
It is lifetime of the Belt.
For details please see Help.
Reset the Fuser unit. Off Blink Indicates that an error is issued in the release
For details please see Help.
Replace the Belt. Off Blink Indicates that the waster toner is full.
It is lifetime of the Belt.
For details please see Help.
Check the Toner cartridge. Off Blink Indicates that forget to lock the level of Toner
The position of the level is
incorrect.
%COLOR%
For details please see Help.
Reset the image drum. Off Blink Indicates that the image drum is not installed
%COLOR%
For details please see Help.
44015503TH Rev. 1
Contents
This error is issued when the counter detects
that the fuser has reached end of life. Print is
stopped.
When the cover is opened/closed, it changes to
the warning status.
This error is issued when the counter detects
that the belt has reached end of life. Print is
stopped.
When the cover is opened/closed, it changes to
the warning status.
position sensor of the fuser.
The printer recovers from this error if the release
position sensor has read out the data after the
cover is closed.
If the printer still cannot recover from this error,
replacement of the fuser is required.
It changes to the warning status after the cover
is opened and closed only once. This error is
issued again after 500 copies are printed.
cartridge.
Error 544: yellow
Error 545: Magenta
Error 546: Cyan
Error 547: Black
correctly..
Error 340: yellow
Error 341: Magenta
Error 342: Cyan
Error 343: Black
Code
Display on operator panel
nnn
Error Reset the fuser.
354
For details please see Help.
Reset the belt.
Error
355
For details please see Help.
Shut off the Electric power,
and wait for a while.
Overheating error of Motor.
Error
348
Close the Cover.
%COvER%
For details please see Help.
Close the Cover.
Error
356
%COvER%
For details please see Help.
Error
Wait for a while.
544
Program data is being
received.
545
546 Please wait for a while.
547 The receiving of Program
data is complete
Error
Check the data.
340 Program data receiving error
341 %DLCODE%
342
343
7. TROUBLESHOOTING PROCEDURE
ON Inspec-
LINE tion Contents
lamp lamp
Off Blink Indicates that the fuser is not Installed correctly.
(This error can occur when the printer
temperature is below 0 degree C. Turn on the
power again after the printer temperature has
increased.)
Off Blink Indicates that the belt is not installed correctly.
Off Blink Indicates the overheating of the ID motor
Off Blink Indicates that the cover is open.
Error 310: Top cover
Error 311: Front cover
Off Blink Indicates that the cover is open.
Error 316: Duplex unit cover.
Off Blink Indicates that the updated NIC program data is
being received.
Off Off Indicates that the receiving of NIC program data
to be updated is complete.
Off On Indicates that error has occurred during the
processing of NIC program data receiving that is
to be updated.
%DLCODE%
1: Size error
2: Checksum error
3: Printer model number error
4: Module I/F version error
5: FAT version error
Code
nnn
Error
320
Error
330
Error
321
Error
310
311
Error
316
Error
Error
Error
172 /