Sub-Zero 500 series Planning And Installation Manual page 11

Optional
Extended
Handle
Full-Length
Door Closed
(Optional 9V Door
Stop Available)
Optional D-Style
Handle on 501 Pair
Figure A
Panel
Panel
Panel
Panel
Panel
Filler
Strip
Allow for Filler
Lap Behind Flange
actual size drawings
These
offer you the opportunity to
better understand unique
situations you may face in
some of your installations.
The page can easily be
removed and photocopied or
used for your own tracings.
Figure A shows the
clearance you would have
for raised panels using the
standard full-length handle
or the optional extended full-
length handle illustrated in
the dash line.
Figure B below illustrates
a typical 501 pair installation
where a filler strip is being
used and the doors open at
the standard I.30 degrees.
Depending on the configura-
tion and panels, this filler
strip will vary.