Vortex 1200
Dimmer Curve
- In this mode you can select the dimmer
curve.
1. Press the MENU button until "Dimmer Curve" is displayed,
press ENTER.
2. The current dimmer curve will setting will be displayed.
3. Press the UP or DOWN buttons to find your desired dimmer
curve and press ENTER to confirm. See the Dimmer Curve Chart
on page 31.
Slave Mode -
This will let you set the unit as a slave in
a master/slave configuration.
1. Press the MENU button until "Slave Mode" is displayed,
press ENTER. Either "Slave 1" or "Slave 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE: In a Master/Slave configuration you can make one fix-
ture the Master and then set the next fixture to "Slave 2", the
fixtures will now have contrast movement to each other.
No DMX
- This mode is used as a precaution mode. In
case the DMX signal is lost, the operating mode chosen in
the setup is the running mode the fixture will go into when
the DMX signal is lost. You can also set this as the operat-
ing mode you would like the unit to return to when power is
applied.
1. Press the MENU button until "No DMX" is displayed, press
ENTER.
2. Either "Hold", "Blackout", or "Show" will be displayed. Choose
an operating mode you would like the unit to start up in when
either power is applied or the DMX signal is lost.
• Blackout - If the DMX signal is lost or power is applied, the unit
ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 11
System Menu
Vortex 1200
Channel
15
Vortex 1200
Channel
1
2
3
4
5
6
7
8
9
Value
61 - 80
81 - 100
101 - 255
DEFAULT TO UNIT CURVE SETTING
Value
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 19
20 - 29
30 - 39
40 - 49
50 - 59
60 - 69
70 - 79
80 - 89
90 - 99
100 - 109
110 - 119
120 - 129
130 - 139
140 - 149
150 - 159
160 - 169
170 - 179
180 - 189
ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 24
15 Channel Mode
Function
DIMMER CURVES
ARCHITECTURAL
THEATRE
17 Channel Mode
Function
PAN
PAN FINE
TILT
TILT FINE
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
WHITE 0% - 100%
COLOR MACROS
OFF
MACRO 1
MACRO 2
MACRO 3
MACRO 4
MACRO 5
MACRO 6
MACRO 7
MACRO 8
MACRO 9
MACRO 10
MACRO 11
MACRO 12
MACRO 13
MACRO 14
MACRO 15
MACRO 16
MACRO 17
Need help?
Do you have a question about the Vortex 1200 and is the answer not in the manual?
Questions and answers