Product names used in this document may be trademarks or product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or registered trademarks of their respective companies and are service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States.
You may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
DO NOT mix fixtures. Vortex 1200 Warranty Registration down The Vortex 1200 carries a 2 year (730 days) limited warranty. Please 0S (Fade Time) 1S (Fade Time) fill out the enclosed warranty card to validate your purchase and war- Ramp Effect down(...
D. The appliance does not appear to operate normally or exhibits a marked change in performance. ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 30 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 4...
(see next page). Never use the carrying handles for secondary attachment. ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 5 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 29...
Page 7
0 - 255 MASTER DIMMER carabine and tighten the safety screw. PAN/TILT MACROS 0 - 7 NO FUNCTION ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 28 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 6...
& 29 channel mode. The DMX address is set on the front 30 - 39 MACRO 2 panel of the Vortex 1200. Your unit and your DMX controller require 40 - 49 MACRO 3 a approved DMX-512 110 Ohm Data cable for data input and data...
Page 9
Data True (+ signal) Pin 3 Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 26 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 8...
Page 10
Firmware Version 90 - 99 BLACKOUT WHILE RGBW CHANGE PRO defaults 100 - 109 NOTHING Reset ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 9 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 26...
MACRO 17 • Blackout - If the DMX signal is lost or power is applied, the unit ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 11 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 24...
Page 13
2. To activate the Pan inversion press the UP or DOWN buttons 41 - 60 until “Yes” is displayed, press ENTER to confim. To deactivate ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 23 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 12...
1. Tap the MENU button until “Reset” is displayed, press 250 - 255 SOUND ACTIVE ENTER. 2. The fixture will now reset the motors. ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 15 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 20...
Page 17
ENTER to confirm. Press the MENU button for one second 104 - 111 MACRO 13 to exit. ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 19 ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 16...
This function allows you to use a univer- 0 - 255 sal DMX-512 controller to create unique programs tailored to your individual needs. The Vortex 1200 has 4 DMX modes; 14 DMX chan- 0 - 255 TILT nels, 15 DMX channels, 17 DMX channels, and 29 DMX channels.
Need help?
Do you have a question about the Vortex 1200 and is the answer not in the manual?
Questions and answers