Iptv - TP-Link Touch P5 AC1900 User Manual

2. 22

IPTV

If your ISP provides IPTV service and has provided some detailed IPTV parameters, you can configure your Touch P5 to permit
IPTV connection.
I want to:
How can I
do that?
Chapter 2 . Configure Touch P5 as a Router
Configure IPTV setup to enable Internet /IPTV /Phone service provided by my Internet Service
Provider (ISP).
1. Visit http://tplinkwifi.net/, and log in with the username and password you set for your Touch P5.
2. Go to Advanced > Network
3. If your ISP provide the networking service based on IGMP technology, e.g., British Telecom
(BT) and TalkTalk in UK:
1 ) Select the IGMP Proxy
information provided by your ISP.
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your Touch P5 now. You can connect
your set-top box to any of your Touch P5's LAN port.
If IGMP is not the technology your ISP apply to provide IPTV service:
1 ) Select the Enable IPTV
2 ) Select the appropriate
no other parameters are required, and then skip to Step 4. Select
listed but provides necessary parameters.
3 ) After you have selected a mode, the necessary parameters are predetermined. You can
perform other configuration, e.g. enter the
Multicast VLAN Priority
4 ) For Russia, Singapore-ExStream, Malaysia-Unifi and Malaysia-Maxis mode, connect device to
the predetermined LAN port. For Bridge and Custom mode, select the
the set-top box to the corresponding port.
5 ) Click Save.
> IPTV to open the configuration page.
checkbox and select the
check box.
Mode according to your ISP. Select
IPTV Multicast VLAN ID
in Russia mode according to your ISP.
IGMP Version, either V2 or V3, according to
Bridge if your ISP is not listed and
Custom
and select the
LAN
if your ISP is not
IPTV
type and connect
52